When it comes to keeping your tires properly inflated, the Nulksen Tire Inflator is a great tool to have in your car. This device is great for inflating car tires, bicycle tires, and even balls and pool floats.
In this article, we will go over the steps of using the Nulksen Tire Inflator to properly inflate your car tire.
Inflating a Car Tire with the Nulksen Inflator
First, you will need to take the cap off of the Schrader valve and then attach the end piece of the inflator over the valve. You may hear the airf low at first, but that is normal.
Once the end piece is locked in place on the tire, you can then press the power button for about three seconds to switch the Nulksen inflator on.
Reading Tire PSI
You will then get a reading on the PSI of the tire. If it is too low, you can set your desired PSI pressing the up and down button. Check your car’s manual or the little sticker on the driver’s side door for the proper inflation pressure.
Single press the power button to begin inflating. Heads up; the Nulksen inflator is loud!
Inflating the Tire
It usually takes about 10 minutes to get the pressure all the way up, so be sure to leave it alone. When you are done, take the end piece off of the valve on your tire, and replace the cap.
Turning the Device Off, Charging
To turn the device off, hold down the power button for another three seconds. To charge the battery, plug it into a USB port on the back of the device. It comes with a charging cable which can be used to charge up the battery.
Overall, the Nulksen Tire Inflator is a great tool to have in your car for emergency situations or for topping up the tires if the temperature changes dramatically. It is also great for inflating bicycle tires and other items around the house. It comes with an attachment to inflate balls and things, making it a great device for all your needs.
Key Takeaways
- The Nulksen Tire Inflator is great for inflating small tires such as on a bicycle or family’s worth of bikes.
- It can also be used to inflate balls and pool floats.
- It takes about 10 minutes for the tire to reach the desired PSI, depending on how low it is.
- Make sure to check the driver’s side door for the recommended PSI for the tires.
- The device can be charged via USB port.