How to Insert Swiffer Wetjet Bottle

Introduction

Welcome to DIY Life Tech! Today, we’ll be taking a look at a crucial step for maintaining a clean and sanitary home environment: How to insert the cleaning fluid bottle into your Swiffer Wet Jet properly. This convenient cleaning tool makes mopping and disinfecting floors a breeze. However, to get the most out of your Wet Jet, it’s essential to install the cleaning fluid bottle correctly. Follow the steps below to ensure your Swiffer Wet Jet is ready to tackle even the toughest messes.

Here’s a video that I made demonstrating the process.

Step 1: Flip the Wet Jet Over

Start by flipping your Swiffer Wet Jet over, ensuring that the small eject button on the handle is facing upwards. Doing this will make it easier to insert the cleaning fluid bottle.

Step 2: Align the Cleaning Fluid Bottle

Next, grab your bottle of cleaning fluid and make sure the label is facing the same direction as the eject button on the Wet Jet. This will ensure that the bottle is correctly oriented for insertion.

Step 3: Insert the Cleaning Fluid Bottle

Now, you’re ready to insert the bottle into the Wet Jet’s handle. Gently press the bottle into the handle until it makes a sound. It’s essential to note that the bottle may not be locked in yet even if it makes a sound upon insertion.

Step 4: Secure the Bottle in Place

Continue pressing the bottle into the handle until it clicks firmly in place. You’ll know it’s locked in securely when you let go, and the bottle stays in place without issue. Even if you pull on the bottle, it should remain firmly attached and ready for use.

Step 5: Prepare for Use

With the cleaning fluid bottle securely in place, you can now flip the Wet Jet back over and attach a cleaning pad. If you already have a cleaning pad in place, you’re ready to start cleaning! Simply press the button on the handle, and the cleaning fluid will shoot out from the front, just as it’s designed to do.

Removing the Cleaning Fluid Bottle

When it comes time to remove the cleaning fluid bottle, you simply need to repeat the process in reverse. Flip the Swiffer Wet Jet over, press the eject button, and the bottle will pop out easily. Typically, you’ll want to do this when the bottle is empty or if you want to switch scents midway through cleaning. In most cases, the bottle shouldn’t leak even after it’s been ejected from the Wet Jet.

Conclusion

And that’s it! By following these simple steps, you can ensure your Swiffer Wet Jet is ready to keep your floors sparkling clean. If you found this guide helpful, please subscribe to DIY Life Tech’s channel for more tips and tricks. Happy cleaning!

Join the free DIY Life Tech newsletter for hands-on reviews of the latest gadgets, insights on generative AI, exclusive discounts on creator tools, and more.

Key Takeaways

  • Flip the Swiffer wet jet over and make sure the eject button is facing upwards.
  • Insert the bottle of cleaning fluid with the label facing the same way as the eject button.
  • Press the bottle in until it clicks and stays in place.
  • Attach a cleaning pad to the handle and press the button.
  • To remove the bottle, flip the Swiffer wet jet over and press the eject button.
  • Empty the bottle before ejecting and inserting a new one.

FAQ

How do I insert the cleaning fluid bottle into my Swiffer wet jet?
A: Flip the wet jet over, make sure the little eject button is facing upwards, then take the bottle of cleaning fluid and insert it with the label facing the same way as the eject button. Press it in all the way until it feels locked in place and it will not come out when you let go.

Q: How do I attach a new cleaning pad?
A: Flip the Swiffer wet jet over and press the button on the handle to get the cleaning fluid shooting out the front. Then attach the new cleaning pad.

Q: How do I remove the cleaning solution from the Swiffer wet jet?
A: Flip the Swiffer wet jet over and press the eject button to pop it out. It doesn’t usually leak, so you can finish it and then eject and insert a new one.

Video Transcript

Tom from DIY Life Tech here to show you how to insert the cleaning fluid bottle into your Swiffer Wet Jet. First, flip the wet jet over and make sure the little eject button is facing upwards. Take the bottle of cleaning fluid and insert it with the label facing the same way as the eject button. Press it in to the handle until it makes a sound – this means it’s not locked in yet. Click it all the way in and you’ll know it’s locked in when it stays in place even when you let go.

Flip it back over, attach a new cleaning pad, press the button on the handle and the cleaning fluid will shoot out. When you’re ready to remove it, flip the Swiffer Wet Jet over, press the eject button and it will pop right out. You can do this if you want to switch the scent midway through cleaning. In my experience, it doesn’t leak even after it’s been ejected, but typically you want to finish it and then eject and insert a new one.

If you found this helpful, please subscribe to my channel – it really helps.